Wooden floor care.
This is how values are preserved.
Initial care &
ongoing care
Depending on the version, all FEEL WOOD floors are available 2x naturally oiled, varnished or raw for individual further treatment. Correct initial care is the basis; ongoing wood floor care preserves the natural beauty for decades.
Initial care after installation
Ongoing cleaning
Refresh & value retention
Solid wood parquet
oiled
painted
Initial care after installation
oiled
- Clean dry (vacuum cleaner with parquet nozzle)
- Wipe damp with wooden floor soap
- If necessary, thin care oil refresher
- Remove excess oil completely
- No oil film should remain
painted
- Dry clean after installation
- No oil treatment necessary
Ongoing cleaning
oiled
- Dry clean regularly
- Moist with wooden floor soap
- Work with little water
- Do not wipe with clean water
- Do not use microfiber
painted
- Dry clean regularly
- Moist with a suitable cleaner for painted surfaces
- Wooden floors
- No waterlogging
- Do not use oil
- No microfiber
Refresh & value retention
oiled
- Refreshing matt or stressed surfaces
- Apply care oil very thinly
- Remove any excess completely
- The condition decides – not the calendar
painted
- Selective repairs possible
- If there is more wear and tear, sand & repaint
- Do not use oil care
3-layer parquet
oiled
painted
Initial care after installation
oiled
- Clean dry (vacuum cleaner with parquet nozzle)
- 2x naturally oiled at the factory → no additional initial care required.
painted
- No oil treatment required.
- Dry clean after installation.
Ongoing cleaning
oiled
- Dry clean regularly (vacuum cleaner with parquet nozzle)
- Moistly moisten with wooden floor soap or a suitable cleaner for oiled floors
- No waterlogging
- Do not wipe with clean water
Do not use microfiber
painted
- Dry clean regularly
- Damp with a suitable parquet cleaner for painted floors
- a waterlogging
- Do not use oil
- a microfiber
Refresh & value retention
oiled
- As required when there is visible stress
- Apply care oil very thinly
- Completely remove excess
painted
- Selective repairs possible
- If there is more wear and tear, sand and repaint
- Do not use oil care
Initial care after installation
- Clean dry (vacuum cleaner with parquet nozzle)
- Wipe damp with wooden floor soap
- If necessary, thin care oil refresher
- Remove excess oil completely
- No oil film should remain
Ongoing cleaning
- Dry clean regularly
- Moist with wooden floor soap
- Work with little water
- Do not wipe with clean water
- Do not use microfiber
Refresh & value retention
- Refreshing matt or stressed surfaces
- Apply care oil very thinly
- Remove any excess completely
- The condition decides – not the calendar
Initial care after installation
- Dry clean after installation
- No oil treatment necessary
Ongoing cleaning
- Dry clean regularly
- Moist with a suitable cleaner for painted surfaces
- Wooden floors
- No waterlogging
- Do not use oil
- No microfiber
Refresh & value retention
- Selective repairs possible
- If there is more wear and tear, sand & repaint
- Do not use oil care
Initial care after installation
- Clean dry (vacuum cleaner with parquet nozzle)
- 2x naturally oiled at the factory → no additional initial care required.
Ongoing cleaning
- Dry clean regularly (vacuum cleaner with parquet nozzle)
- Moistly moisten with wooden floor soap or a suitable cleaner for oiled floors
- No waterlogging
- Do not wipe with clean water
Do not use microfiber
Refresh & value retention
- As required when there is visible stress
- Apply care oil very thinly
- Completely remove excess
Initial care after installation
- No oil treatment required.
- Dry clean after installation.
Ongoing cleaning
- Dry clean regularly
- Damp with a suitable parquet cleaner for painted floors
- a waterlogging
- Do not use oil
- a microfiber
Refresh & value retention
- Selective repairs possible
- If there is more wear and tear, sand and repaint
- Do not use oil care
Avoid standing moisture and absorb liquids immediately. Use felt pads under furniture. Remove sand and sharp-edged particles regularly.
Care and processing instructions must be observed. Only use suitable products that match the surface.
Raw solid wood and parquet floors are untreated. Before use, professional sanding, oiling or painting is required. Long-term use is not possible without surface protection.
PRESERVE VALUES. FROM THE BEGINNING.
QUALITY DESERVES THE RIGHT CARE.
Your wooden floor. Properly maintained.
With the right wooden floor care, your FEEL WOOD solid wood floor will remain naturally beautiful, durable and retain its value for many years.
Only use care products that are tailored to your surface – for optimal protection and long-term quality.
Would you like to order the right care products?
Use our contact form – we will be happy to advise you and help you choose the right products for your floor.
FEEL the WOOD
Inspiration, expertise and real projects involving wood for walls, ceilings and floors.To our blog posts
Two solutions. A claim.
Naturalness meets construction – for modern living and sophisticated architecture.To the solid wood floorboard
To the parquet floors
Answers about solid wood flooring and parquet
How do I care for oiled FEEL WOOD floors?
Sweep or vacuum regularly, mop with a damp cloth using wooden floor soap and re-oil depending on usage.
How do I care for varnished parquet floors?
Clean with a damp cloth using a mild cleaning agent.
Re-oiling is not necessary.